Rants

431 Articles

The Long And The Short Of It

April 20, 2024 by 8 Comments

Last weekend was Hackaday Europe 2024, and it was great. Besides having some time to catch up with everyone, see some fun new badge hacks, and of course all the projects that folks brought along, I also had time to attend most all of the talks. And the talks were split into two distinct sections: long-format talks on Saturday and a two-hour session of seven-minute lightning talks on Sunday.

I don’t know if it’s our short attention spans, or the wide range of topics in a short period of time, but a number of people came up after the fact and said that they really appreciated the short-but-sweet format. One heretic even went so far as to suggest that we only have lightning talks in the future.

Well, we’ve done that before – the Hackaday Unconferences. One year, we even ran three of them simultaneously! I was at Hackaday’s London Unconference the year later, and it was a blast.

But I absolutely appreciate the longer talks too. Sometimes, you just have to give a speaker free rein to dig really deeply into a topic. When the scope of the project warrants it, there’s just no substitute for letting someone tell the whole story. So I see a place for both!

If you were at Hackaday Europe, or any other conference with a lightning talks track, what do you think? Long or short? Or a good mix?

This article is part of the Hackaday.com newsletter, delivered every seven days for each of the last 200+ weeks. It also includes our favorite articles from the last seven days that you can see on the web version of the newsletter. Want this type of article to hit your inbox every Friday morning? You should sign up!

Microsoft Killed My Favorite Keyboard, And I’m Mad About It

April 16, 2024 by 61 Comments

As a professional writer, I rack up thousands of words a day. Too many in fact, to the point where it hurts my brain. To ease this burden, I choose my tools carefully to minimize obstructions as the words pour from my mind, spilling through my fingers on their way to the screen.

That’s a long-winded way of saying I’m pretty persnickety about my keyboard. Now, I’ve found out my favorite model has been discontinued, and I’ll never again know the pleasure of typing on its delicate keys. And I’m mad about it. Real mad. Because I shouldn’t be in this position to begin with!

Continue reading “Microsoft Killed My Favorite Keyboard, And I’m Mad About It” →

In A Twist, Humans Take Jobs From AI

April 9, 2024 by 41 Comments

Back in the 1970s, Rockwell had an ad that proudly proclaimed: “The best electronic brains are still human.” They weren’t wrong. Computers are great and amazing, but — for now — seemingly simple tasks for humans are out of reach for computers. That’s changing, of course, but computers are still not good at tasks that require a little judgment. Suppose you have a website where people can post things for sale, including pictures. Good luck finding a computer that can reliably reject items that appear to be illegal or from a business instead of an individual. Most people could easily do that with a far greater success rate than a computer. Even more so than a reasonable-sized computer.

Earlier this month, we reported on Amazon stepping away from the “just walk out” shopping approach. You know, where you just grab what you want and walk out and they bill your credit card without a checkout line. As part of the shutdown, they revealed that 70% of the transactions required some human intervention which means that a team of 1,000 people were behind the amazing technology.

Humans in the Loop

That’s nothing new. Amazon even has a service called Mechanical Turk that lets you connect with people willing to earn a penny a picture, for example, to identify a picture as pornographic or “not a car” or any other task you really need a human to do. While some workers make up to $6 an hour handling tasks, the average worker makes a mere $2 an hour, according to reports. (See the video below to see how little you can make!) The name comes from an infamous 200-year-old chess-playing “robot.” It played chess as well as a human because it was really a human hiding inside of it.

Continue reading “In A Twist, Humans Take Jobs From AI” →

Understand Your Tools: Finger Exercises

April 6, 2024 by 12 Comments

A dip meter is basically a coil of wire that, when you excite it, you can use to tell if something inside that coil is resonating along. This lets you measure unknown radio circuits to figure out their resonant frequency, for instance. This week, we featured a clever way to make a dip meter with a nanoVNA, which is an odd hack simply because a dip meter used to be a common spare-parts DIY device, while a vector network analyzer used to cost more than a house.

Times have changed, and for the better. Nowadays, any radio amateur can pick up a VNA for less than the cost of all but the cheesiest of walkie talkies, putting formerly exotic test equipment in the hands of untrained mortals. But what good is a fancy-pants tool if you don’t know how to use it? Our own Jenny List faced exactly this problem when she picked up a nanoVNA, and her first steps are worth following along with if you find yourself in her shoes.

All of this reminded me of an excellent series by Mike Szczys, “Scope Noob”, where he chronicled his forays into learning how to use an oscilloscope by running all of the basic functions by working through a bunch of test measurements that he already knew the answer to.

It strikes me that we could use something like this for nearly every piece of measuring equipment. Something more than just an instruction manual that walks you through what all the dials do. Something that takes you through a bunch of example projects and shows you how to use the tool in question through a handful of projects. Because these days, access to many formerly exotic pieces of measuring gear has enabled many folks to have gear they never would have had before – and all that’s missing is knowing how to drive them.

This article is part of the Hackaday.com newsletter, delivered every seven days for each of the last 200+ weeks. It also includes our favorite articles from the last seven days that you can see on the web version of the newsletter. Want this type of article to hit your inbox every Friday morning? You should sign up!

Too Much Over-optimization Is Never Enough!

March 30, 2024 by 21 Comments

A discussion came up on the Hackaday Discord PCB design channel about resistor networks, and it got me thinking about whether we (the hacker community) use them in designs or not. These handy devices often take the shape of an IC, SMD or otherwise, but between the pins are a bunch of resistors instead of active silicon. They come in all sorts of configurations and tolerances, but the point is usually the same: When you need a bunch of similar resistors, it’s cheaper to go with a network package.

But how much cheaper? I did a quick search for 1 kΩ resistors and the corresponding network, and came up with similar prices for the resistors and networks – but the network has eight resistors in it! That’s an eightfold savings! Which, at a price of roughly one cent per piece, is less than a dime. While it’s certainly true that if you’re making a million widgets, saving a penny per widget matters. But do you spend the time to optimize your projects down to such margins? I want to say “of course not!” but maybe you do?

For me, worrying about seven cents in a PCB design that I may make ten of is foolishness. But still, I’ve used resistor networks for their other side effects: the resistors in a common package tend to be very tightly matched, even if their overall tolerance isn’t. If you’re making something like an R-2R DAC, that’s a definite advantage. Or if you’re space constrained, or just hate placing lots of tiny resistors, the networks shine.

I often forget about resistor networks, and when I do think of them, I think of them in terms of cost savings in industrial applications. But maybe that’s not fair – maybe they do have their hacker uses as well. Are there other parts like this that we should all know about?

This article is part of the Hackaday.com newsletter, delivered every seven days for each of the last 200+ weeks. It also includes our favorite articles from the last seven days that you can see on the web version of the newsletter. Want this type of article to hit your inbox every Friday morning? You should sign up!

Tech Support… Can AI Be Worse?

March 28, 2024 by 56 Comments

You can’t read the news today without another pundit excitedly reporting how AI is going to take every job you can imagine. Of course, AI will change the employment landscape. It will take some jobs and reduce the need for others. What about tech support? Is it possible that an AI might be able to help people with technical issues better than humans? My first answer was no way, but then I was painfully reminded of something. The question isn’t if AI can help you better than any human can. The question is if AI can help you better than the low-paid person on the other end of the phone you are likely to talk to. Sadly, I think the answer to that question is almost certainly yes.

In all fairness, if you read Hackaday, you probably don’t encounter many technical support people who can solve a problem you can’t. By the time you call them, it is a lost cause. But this is more than just “Hackday folks are smarter than the tech support agents.” The overall quality of tech support at many companies is rock bottom no matter who you are. Continue reading “Tech Support… Can AI Be Worse?” →

It’s About Time

March 23, 2024 by 52 Comments

I’m pretty good with time zones. After all, I live in Germany, Hackaday’s server is in Los Angeles, and our writers are scattered all over the globe. I’m always translating one time into another, and practice makes (nearly) perfect. But still, it got me.

I was in the states visiting my parents, when Daylight Saving Time struck, but only in the USA. Now all my time conversions were off by an hour, and once I’d worked through the way the sun travels around the globe, I thought I had it made. And then my cell phone started reporting a time that was neither CEST nor EDT, but a third time zone that was an hour off. Apparently some cell towers don’t transmit time zone information, and my phone defaults to UTC. Who knew? For a short while, my phone lied to me, the microwave oven clock in the hotel lied to me, and I felt like I was going nuts.

But this all got me thinking about clocks and human time, and possibly the best advice I’ve ever heard for handling it in your own programs. Always keep time in something sensible like UNIX time – seconds elapsed since an epoch – because you don’t have to worry about anything more than adding one to a counter every second. When and if you need to convert to or from human times, you can write the function to do that simply enough, if you don’t already have a library function to do so.

Want to set an alarm for 2 hours from now? That’s easy, because you only need to add 7,200 seconds, and you don’t need to worry about 59 wrapping around to 0 or 23:59 to 0:00. Time math is easy in seconds. February 29th? That’s just another 86,400 seconds. It’s only us humans who make it complicated.

This article is part of the Hackaday.com newsletter, delivered every seven days for each of the last 200+ weeks. It also includes our favorite articles from the last seven days that you can see on the web version of the newsletter. Want this type of article to hit your inbox every Friday morning? You should sign up!