Abstract

In order to assess the genotype by environment interaction (GE) and select genotypes to exploit narrow and broad adaptations, twenty-two spring oilseed rape genotypes were subjected to field surveys at five experimental sites in the 2015-16 and 2016-17 growing seasons. Plant materials were sown in the form of a randomized complete block design with three replicates. The additive main effects and multiplicative interaction (AMMI) model was used to determine the genotype, environment, and GE effects. The sum of squares (SS) for the first three interaction principal components was very close to the SS for the GE signal; therefore, AMMI3 was diagnosed as the most accurate model to optimize predictive accuracy. SAN48 had the highest broad adaptability. In total, the chances of increasing yield were 55.80% from broad adaptations, 26.73% from narrow adaptations with 4 mega-environments, and an additional 17.47% from narrow adaptations with 5 mega-environments.

Keywords:
Broad adaptation; mega-environment; narrow adaptation; yield stability

INTRODUCTION

Oilseed rape (Brassica napus L.) is an important crop that is grown worldwide for oil extraction. In Iran, due to a lack of local production, a considerable portion of edible oil needs is met through imports. The Iranian government has recently considered oilseed rape as the leading prospect for increasing oil production and reducing dependence on imports. Agricultural data show that, in 2017, 12,8567 t of oilseed rape was harvested in Iran from an area of about 70,444 ha, for an average mean yield of about 1825 kg ha^-1 (FAO 2018 FAO - Food and Agriculture Organization of the United Nations (2018) FAOSTAT statistical database. FAO, Rome. ). Thus, there is a serious need to increase domestic oilseed production. As a result, several breeding programs have been designed to increase oilseed rape performance. The challenge is that yield is a complex trait that is controlled by several genes and is strongly influenced by the environment. Field crops may exhibit significantly different performances across different environments, an effect identified as the genotype by environment interaction (GE). Consequently, the GE must be evaluated prior to releasing newly developed and/or introduced cultivars. The goal is to identify genotypes that show both high mean performance and high stability (i.e. less fluctuation) in multi-environment trials (MET).

According to Yan et al. (2007)Yan W, Kang MS, Ma B, Woods S and Cornelius PL (2007) GGE Biplot vs. AMMI Analysis of Genotype-by-Environment Data. Crop Science 47:643-653., in MET, the yield of each genotype is influenced by the effects of the environment (E), genotype (G), and GE. Among these, only the G and GE are significant for evaluating new cultivars. The GE weakens the relationship between phenotype and genotype and thus reduces the efficiency of selection (Kebede B and Getahun 2017Kebede B A and Getahun A (2017) Adaptability and stability analysis of groundnut genotypes using AMMI model and GGE-biplot. Journal of Crop Science and Biotechnology 20:343-349.). In addition, the GE cannot be explained independently through the G or E. Therefore, several statistical methods, such as parametric and nonparametric approaches, have been developed to analyze the GE across environments (). Among parametric methods, the additive main effects and multiplicative interaction (AMMI) is an effective multivariate model that is frequently used by plant breeders and agricultural researchers to estimate crop adaptability and stability, as well as to detect mega-environments (Shahriari et al. 2018Shahriari Z, Heidari B and Dadkhodaie A (2018) Dissection of genotype × environment interactions for mucilage and seed yield in Plantago species: Application of AMMI and GGE biplot analyses. PLoS ONE 13:e0196095.). The AMMI model came to the attention of agricultural researchers particularly through the publications of Kempton (1984)Kempton RA (1984) The use of biplots in interpreting variety by environment interactions. The Journal of Agricultural Science 103:123-135. and Zobel et al. (1988)Zobel RW, Wright MJ and Gauch HG (1988) Statistical Analysis of a Yield Trial. Agronomy Journal 80:388-393.. Since then, AMMI has become a popular statistical tool among agricultural researchers for the purposes of understanding the GE and for gaining accuracy in selection if stable jenotypes in many crops, such as wheat (Singh et al. 2019Singh C, Gupta A, Gupta V, Kumar P, Sendhil R, Tyagi B, Singh G, Chatrath R and Singh G (2019) Genotype x environment interaction analysis of multi-environment wheat trials in India using AMMI and GGE biplot models. Crop Breeding and Applied Biotechnology 19: 309-318.), barley (Kiliç 2014Kiliç H (2014) Additive Main Effects and Multiplicative Interactions (AMMI) Analysis of Grain Yield in Barley Genotypes Across Environments. Journal of Agricultural Sciences 20:337-344.), cassava (Morais et al. 2017Morais LK, Santiago AD and Cavalcante MHB (2017) Phenotypic stability in cassava estimated by the AMMI analysis with supplementary genotypes. Crop Breeding and Applied Biotechnology 17: 366-372.), and oilseed rape (Marjanović-Jeromela et al. 2011Marjanović-Jeromela A, Nagl N, Gvozdanovi -Varga J, Hristov N, Kondi -Špika A and Marinkovi MVaR (2011) Genotype by environment interaction for seed yield per plant in rapeseed using AMMI model. Pesquisa Agropecuária Brasileira 46:174-181.; Zali et al. 2016Zali H, Sofalian O, Hasanloo T and Asghari A (2016) AMMI and GGE Biplot Analysis of Yield Stability and Drought Tolerance in Brassica napus L. Agricultural Communications 4:1-8.; Nowosad et al. 2016Nowosad K, Liersch A, Popławska W and Bocianowski J (2016) Genotype by environment interaction for seed yield in rapeseed (Brassica napus L.) using additive main effects and multiplicative interaction model. Euphytica 208:187-194.) genotypes.

AMMI uses principal component analysis (PCA) for visualizing the GE in what is known as a biplot diagram (Sadeghzadeh et al. 2018Sadeghzadeh B, Mohammadi R, Ahmadi H, Abediasl GR, Ahmadi MM, Mohammadfam M, Bahrami N, Khaledian MS and Naserian AA (2018) GGE biplot and AMMI application in the study of adaptability and grain yield stability of durum lines under dryland conditions. Environmental Stresses in Crop Sciences 11:241-260.). The method is used to identify genotypes with a high mean yield and considerable adaptability to the desired area through analysis of variance (ANOVA) and mega-environment delineation (Gauch 2013Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869.; Hongyu et al. 2014Hongyu K, García-Peña M, de Araújo LB and dos Santos Dias CT (2014) Statistical analysis of yield trials by AMMI analysis of genotype× environment interaction. Biometrical letters 51:89-102.). Literature shows that AMMI analysis of MET data includes four major steps: 1 - analysis of variance, 2 - model diagnosis, 3 - mega-environment delineation, and 4 - selection and recommendation (Haider et al. 2017Haider Z, Akhter M, Mahmood A and Khan RAR (2017) Comparison of GGE biplot and AMMI analysis of multi-environment trial (MET) data to assess adaptability and stability of rice genotypes. African Journal of Agricultural Research 12:3542-3548.; Siger et al. 2018Siger A, Michalak M, Lembicz J, Nogala-Kałucka M, Cegielska-Taras T and Szała L (2018) Genotype × environment interaction on tocochromanol and plastochromanol-8 content in seeds of doubled haploids obtained from F1 hybrid black × yellow seeds of winter oilseed rape (Brassica napus L.). Journal of the Science of Food and Agriculture 98:3263-3270.; Sousa et al. 2018Sousa MBE, Damasceno-Silva KJ, Rocha MDM, Menezes Júnior JÂND and Lima LRL (2018) Genotype By Environment Interaction In Cowpea Lines Using GGE Biplot Method. Revista Caatinga 31:64-71.).

Iran, which has diverse agro-ecological regions, needs to identify cultivars or genotypes suitable for each region and increase the area and production of oilseed rape. Therefore, the objective of this study was to evaluate the adaptability and stability of the seed yield of 22 oilseed rape genotypes across five different regions of Iran using the AMMI model.

MATERIAL AND METHODS

Plant materials of this study consisted of 22 genotypes of spring oilseed rape (comprised of 21 advanced lines and one check variety) that were the object of field surveys at five experimental sites over two growing seasons (2015-16 and 2016-17), resulting in 10 environments (combinations of locations and years). These 22 genotypes are in fact the top genotypes selected from a rapeseed population consisting of 32 genotypes (30 promising lines and two control varieties, RGS003 and Delgan), which were subjected to a one-year preliminary experiment in 4 warm regions of Iran. Of these 22 genotypes, those with top performance and yield stability will be selected and registered as new cultivars in the Variety Release Committee of Iran and will be available to farmers. The codes assigned to each genotype, along with corresponding pedigrees, are detailed in Table 1. The locations consisted of Sari, Gorgan, Borazjan, Dezful, and Zabol. More information on these locations has been provided in Table 2. The selected locations cover different types of weather conditions, including warm and humid, and warm and arid climates (the northern, southern, and western parts of Iran). In each environment (location-year combination), plant materials were sown in the form of a randomized complete block statistical design, with three replicates. Each genotype was cultivated on a 5 × 1.2 m plot consisting of four rows spaced at 30 centimeters. Planting time and crop maintenance stages were based on the local agro-ecological conditions at each test location. Fertilization was carried out based on the results of soil analysis. At harvest time, seed yield was measured on a plot basis in each test environment and converted to kg ha^-1 for statistical analyses.

The AMMI model was used to determine the G, E, and GE effects. The AMMI model for yield of the i-th genotype in the j-th environment is:

$Y_{ge}=\mu +{\alpha }_g+{\beta }_e+{\sum }_n{\lambda }_n{\delta }_{gn}{\delta }_{en}+{\rho }_{ge}$ [1]

where Y _ge is the yield of genotype g in environment e; μ is the grand mean; α _g is the genotype deviation from the grand mean; β _e is the environment deviation; λ _n is the singular value for principal component (PC) n and, correspondingly, ${\mathrm{\lambda }}_n^2$is its eigenvalue; ${\delta }_{gn}$is the eigenvector value for genotype g and component n; ${\delta }_{en}$is the eigenvector value for environment e and component n, with both eigenvectors scaled as unit vectors; and ${\rho }_{ge}$ is the residual.

AMMI analysis was performed using AMMISOFT version 1.0, available at <https://scs.cals.cornell.edu/people/hugh-gauch/>. The map of Iran was drawn using MapViewer 8 software. AMMI1 graphs were prepared using Microsoft Excel 2013. Cross validation analysis was performed using MATHMODEL 3.0.

RESULTS AND DISCUSSION

Analysis of variance

The mean total yield of the genotypes studied ranged from 1953 to 2665 kg ha^-1 throughout the environments, with an average of 2276 kg ha^-1 (Table 1). G15 had the highest mean yield, and G2 had the lowest. The average yield per environment ranged from 686 kg ha^-1 (G21 in E6) to 3869 kg ha^-1 (G22 in E5). Most of the genotypes had maximum yield in the E8 and E5 environments, while the lowest average yield of the genotypes was in E2 (Table 1).

In the present study, the responses of oilseed rape genotypes to environmental conditions were investigated by the AMMI model based on variations in seed yield. The genotypes included in this study have had considerable yield potential. The results of AMMI analysis for seed performance of 22 oilseed rape genotypes studied across ten environments have been summarized in Table 3. In the first step, the worthiness of the analysis was assessed. According to Gauch (2013)Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869., AMMI analysis is likely worthwhile if the sum of squares (SS) for the GE signal (SSGE_S) is at least as large as that for SSG. In the present study, the SSGE_S (61211676.53) was approximately 1.9 times as large as SSG (32673639.88), indicating that AMMI analysis was likely to be worthwhile. In addition, the ANOVA table shows that 57.04% of the SS treatment was due to SSE and SSGE_N (sum of squares of GE noise), whereas 42.96% was due to SSG and SSGE_S. The results also indicated that 48.11% of the treatment was due to environmental effects, whereas 14.95% belonged to genotypic effects and 36.94% to the GE effects. Hence, the environment contributed more to the total variation in seed yield than the G and GE.

Marjanović-Jeromela et al. (2011)Marjanović-Jeromela A, Nagl N, Gvozdanovi -Varga J, Hristov N, Kondi -Špika A and Marinkovi MVaR (2011) Genotype by environment interaction for seed yield per plant in rapeseed using AMMI model. Pesquisa Agropecuária Brasileira 46:174-181. assessed the genotype by environment interaction for seed yield per plant in 19 rapeseed cultivars grown in northern Serbia by the AMMI model and found that 72.49% of the total yield variation was explained by the environment, 7.71% by differences between genotypes, and 19.09% by the genotype by environment interaction. Zali et al. (2016)Zali H, Sofalian O, Hasanloo T and Asghari A (2016) AMMI and GGE Biplot Analysis of Yield Stability and Drought Tolerance in Brassica napus L. Agricultural Communications 4:1-8. estimated grain yield stability of six rapeseed genotypes using the AMMI model over two consecutive growing seasons and found that the E, GE, and G explained 79.98%, 13.83%, and 6.19% of total yield variation, respectively. Likewise, Nowosad et al. (2016)Nowosad K, Liersch A, Popławska W and Bocianowski J (2016) Genotype by environment interaction for seed yield in rapeseed (Brassica napus L.) using additive main effects and multiplicative interaction model. Euphytica 208:187-194. assessed the GE pattern for seed yield in 25 rapeseed cultivars grown in five localities of West Poland by the AMMI model and found that 69.82%, 13.67%, and 8.15% of the total yield variation was explained by the E, G, and GE effects, respectively. Thus, they also found that rapeseed yield was highly influenced by environmental factors.

The results of research by Tadesse et al. (2018)Tadesse T, Sefera G and Tekalign A (2018) Genotypes Environment interaction analysis for Ethiopian mustard (Brassica carinata L.) genotypes using AMMI model. Journal of Plant Breeding and Crop Science 10:86-92. on 17 Brassica carinata advanced genotypes across 6 environments showed that environmental effects were responsible for more than 79% of the total variation, while G accounted for 4.78% and the GE for 15.55%. Marjanović-Jeromela et al. (2011)Marjanović-Jeromela A, Nagl N, Gvozdanovi -Varga J, Hristov N, Kondi -Špika A and Marinkovi MVaR (2011) Genotype by environment interaction for seed yield per plant in rapeseed using AMMI model. Pesquisa Agropecuária Brasileira 46:174-181. performed AMMI analysis over an oilseed rape population consisting of 19 genotypes and showed that 72.49% of the total variation in seed yield was due to environmental effects, while the G accounted for merely 2.65% and the GE for 9.40%. Shahriari et al. (2018)Shahriari Z, Heidari B and Dadkhodaie A (2018) Dissection of genotype × environment interactions for mucilage and seed yield in Plantago species: Application of AMMI and GGE biplot analyses. PLoS ONE 13:e0196095. proposed that in MET data, the contribution of the G, E, and GE effects to the total variation can be considered as 20%, 70%, and 10%, respectively.

The first six significant principal components accounted for 92.71% of the total variation in the GE. The first PCA explained 29.20% of the variation from the GE, while PCA2, PCA3, PCA4, PCA5, and PCA6 accounted for 25.13, 13.38, 10.59, 9.06, and 5.35%, respectively. The effect of the GE was 2.5 times greater than the effect of genotype (Table 3).

Model diagnosis

Model selection is one of the most important steps in AMMI analysis. As discussed by Gauch (2013)Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869., in most published papers related to AMMI analysis, no model diagnosis was performed. Instead, AMMI1 was taken as an automatic default, because convenient two-dimensional graphs can be based on such models. Model diagnosis matters because selection of the best AMMI model will increase predictive accuracy.

AMMI comprises a family of models, with AMMI0 (the merely additive model), AMMI1, AMMI2, and so on. Statistical significance, agricultural interpretability, and predictive accuracy are the three criteria for model diagnosis. Predictive accuracy is the most important of these three criteria (Gauch 2013Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869.) and it has mostly been assessed using cross-validation. In this method, for each member of the family of AMMI models, the Root Mean Square Prediction Difference (RMSPD) between validation data and model estimates is calculated. Subsequently, maximum predictive accuracy will belong to that model which has the lowest RMSPD value.

An alternative to cross-validation, which has been used in this study, is to estimate the SS for GE_S. As proposed by Gauch (2013Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869.), this method is computationally trivial and yet rather reliable. This method is actually equal to retaining as many PCs as needed for the sum of their eigenvalues to approximate the SSGE_S, namely 61211676.53 As shown in Table 3, the SSGE, SSGE_N, and SSGE_S were estimated to be 80,732,881.86, 19,521,205.34 (or 24.18% of SSGE), and 61,211,676.53 (or 75.82% of SSGE). From Table 3, the cumulative sum of squares (CSS) for the first four PCs (AMMI models) are 23,577,723.39, 43,861,701.2, 54,665,203.93, and 63,218,472.41, respectively. Among these models, the CSS for PC3 is close to SSGE_S, and it is better not to add PC4 with its SS of 8,553,268.48. In addition, AMMI3 was superior to AMMI4 with regard to the fact that early PCs capture a signal, whereas late PCs capture noise; discarding noise improves accuracy and increases repeatability. Hence, the model diagnosis for optimizing predictive accuracy is AMMI3.

It may be imagined that a model lower than AMMI3 (for example AMMI1) would be more appropriate because of practical constraints that require few mega-environments. However, it should be noted that the situation of fewer mega-environments is justified when more emphasis is placed on the use of broad adaptation. For our dataset, however, the SSGE_S was 1.87 times that for GEN main effects, showing that narrow adaptation was more important. As shown in Table 4, AMMI1 leads to the formation of 4 mega-environments, whereas we will have 5 mega-environments with AMMI3, which does not different much from the number of AMMI1. Moreover, Table 4 shows a maximum man yield of 2972 kg ha^-1 called “Ockham’s hill” for yield as a function of the number of mega-environments. In this Table, from left to right, accuracy initially increases while mostly signal is captured, and afterward decreases while mostly noise is captured, resulting in the formation of “Ockham’s hill”. To the left of Ockham’s hill, models are less accurate because they underfit signal. Likewise, models placed on the right side are also less accurate because they overfit noise. As can be seen, the maximum yield of 2972 kg ha^-1 for AMMI3 was at 5 mega-environments, while fewer mega-environments underfit signal and more mega-environments overfit noise. The above results justify the use of AMMI3 for optimizing predictive accuracy instead of AMMI4 or AMMI1.

We also performed cross-validation analysis. The results showed that AMMI4 followed by AMMI3 had the lowest RMSPDs (data not shown). However, as explained above, AMMI3 was selected with regard to the fact that, in general, it is preferable to select the simpler model (i.e., AMMI3 rather than AMMI4) when two successive members of the family of models are nearly tied for maximizing predictive accuracy.

In general, AMMI1, the model most suitable for mega-environment delineation, was used to delineate mega-environments. However, after identifying the winning genotype in each of the 10 environments by the AMMI model, the most accurate member of this family of models, namely AMMI3, was used to estimate the yields of those winners.

Mega-environment delineation

Detection of mega-environments is useful in finding general patterns that fit most of the data. Mega-environments are commonly distinguished by having different genotype winners. Table 4 displays the genotype winners and the consequent numbers of mega-environments for AMMI models from AMMI0 to AMMIF. The top 4 genotypes in each of the 10 environments have been listed in Table 5 based on the three members of the family of AMMI models. According to Table 5, AMMI1 had 4 winners (i.e., G19, G22, G15, and G14), whereas there were 5 winners according to AMMI3. Also, with the AMMIF model, 7 out of the 22 genotypes won the first rank in at least 1 environment. As shown in the two tables above, there was a greater number of winner genotypes with higher AMMI models, and this implies that a greater number of winner genotypes (and thus a greater number of mega-environments) was associated with more complexity in the AMMI model. Therefore, parsimonious models, such as AMMI1, which are commonly accompanied with more signal in the GE, should be the best for mega-environment delineation.

Figure 1 displays the mean vs. stability view of the AMMI1 biplot, visualizing mega-environments, as well as their winner genotypes. According to Table 5 and Figure 1, four mega-environments were delineated through the AMMI1 model. Mega-environment one consisted of E10, E5, and E4, in which G19 was the winner genotype, whereas E2 and E3 formed mega-environment two, with G22 as the winner genotype. E2 plus E3 were placed in mega-environment three, which had the lowest PC score and was therefore the most stable mega-environment, where G15, the most stable genotype, was the winner. The fourth mega-environment consisted of E7, E8, and E1, in which G14 was the winner genotype.

Selection and recommendation

As emphasized by Gauch (2013)Gauch HG (2013) A Simple Protocol for AMMI Analysis of Yield Trials. Crop Science 53:1860-1869., selection of the best genotypes should ideally be performed with yield estimates in the context of a given mega-environment scheme. Furthermore, plant breeders usually pay attention to broad and narrow adaptation for increasing yield. Figure 1 shows that G15 had the highest mean yield, followed by G14, G22, and G19. Among these, G15, with an PC1 score near 0, was the most stable genotype. The results summarized in Table 4 show the most important aspects of adaptability considered by plant breeders for increasing yield, namely: i) broad adaptations, ii) narrow adaptations that can be exploited with the AMMI1 model (4 mega-environments), and iii) additional narrow adaptations with the AMMI3 model (5 mega-environments). First, the grand mean (2276.10 kg ha^-1), which is practically equal to complete ignorance of both broad and narrow adaptations, was considered as a base. Broad adaptability is achieved when all environments are considered as a single mega-environment, which is equal to exploiting AMMI0. As shown in Table 4, G15 was the winner with AMMI0. Consequently, this genotype had the highest broad adaptability, which gives a yield increase of 2664.4 - 2276.10 = 388.30 kg ha^-1. In addition, G19, G22, G15, and G14 showed the highest narrow adaptations, with 4 mega-environments delineated by AMMI1. According to Table 4, exploiting AMMI1 led to an additional yield increase of 2850.4 - 2664.4 = 186 kg ha^-1. Finally, the use of AMMI3 formed 5 mega-environments, with G22, G19, G6, G15, and G14 as the winner genotypes. Moreover, utilization of AMMI3, which maximizes possible average yield, resulted in an additional yield increase of 2972 - 2850.4 = 121.6 kg ha^-1. Hence, the total yield increase compared to the grand mean (ignorance of both broad and narrow adaptations) was 695.90 kg ha^-1. Therefore, the opportunities to increase yield were 55.80% from broad adaptations, 26.73% from narrow adaptations with 4 mega-environments, and an additional 17.47% from narrow adaptations with five mega-environments. Most of the opportunity from narrow adaptations (60.47%) can be achieved with four mega-environments, which was substantial, compared to that from broad adaptations.

According to Table 4, AMMIF, which represents the information from the yield-trial experiment, led to a yield increase of 586.80 kg ha^-1, whereas AMMI3, representing the additional information from statistical analysis, resulted in a further yield increase of 102.70 kg ha^-1. Therefore, in this study, 85.11% of the yield gain was due to the experiment, and 14.89% was due to the analysis. Because of the negligible cost of statistical analysis compared to the cost of a yield trial, AMMI analysis provided a very valuable opportunity for adding value to this study.

Agricultural interpretability

Genotypes in Table 4 and environments in Table 5 have been listed in their PC1 order, so those at the top and bottom have opposite GE patterns. This means that a genotype at the top of Table 4 had a positive GE with the environment at the top of Table 5 and a negative GE with environments at the bottom of Table 5. Therefore, genotype 19 (G19) had a positive GE with environments E10 and E5 and a negative GE with environments E1 and E7, while G14 (G14) had a positive GE with E1 and E7 and a negative GE with E10 and E5. There was a significant negative correlation between PC1 and the amount of rainfall recorded for each environment (-0.767). This result showed that the AMMI1 mega-environments had an evident agricultural interpretation in terms of rainfall so that mega-environment 4, with negative PC1 values, had the highest amount of rainfall, whereas other mega-environments had a much more limited rainfall. Correspondingly, Genotype 14 would be more suitable for areas with relatively high rainfall, whereas Genotype 15, 22, and 19 would be suitable for areas with moderate to low atmospheric rainfall. Moreover, except for G10, G15, and G16 (more than 86% of the genotypes), the mean seed yield was significantly and negatively correlated with the minimum temperature, showing the importance of this environmental parameter in oilseed rape farming.

Conclusion

In this study, mean seed yield was highly affected by environment, genotype by environment interaction, and genotype effects, respectively. Exploiting AMMI analysis resulted in a yield increase of 695.90 kg ha^-1 compared to the grand mean. Of this amount, the contribution of broad adaptation was 72.86% and narrow adaptation was 27.14%. Furthermore, 14.89% of yield gain was due to AMMI analysis providing an opportunity for adding considerable value to the research. The AMMI model had high ability for distinguishing and recommending genotypes with narrow and broad adaptations. In total, G15 (i.e., Hyola 401) had the highest broad adaptability, recommendable for all environments. G22 (i.e., Belinda) was the most suitable genotype for environments E2, E4, and E10; G19 (i.e. Solar cl) for E3 and E5; SAN39 for E6; G15 for E9; and G14 for E1, E7, and E8.

ACKNOWLEDGMENTS

The authors would like to thank Dr. A. Faraji, Dr. W. Ramaye, N. Kh. Kazerani, Dr. H. R Fanaei, and Dr. S. A. Kalantar Ahmadi for conducting experiments and field surveys at experimental sites. We would also like to thank the Seed and Plant Improvement Institute for funding the project.

REFERENCES

Publication Dates

History