Recently, Convolutional Neural Networks (CNNs) have shown promising performance in super-resolution (SR). However, these methods operate primarily on Low Resolution (LR) inputs for memory efficiency but this limits, as we demonstrate, their ability to (i) model high frequency information; and (ii) smoothly translate from LR to High Resolution (HR) space. To this end, we propose a novel Incremental Residual Learning (IRL) framework to address these mentioned issues. In IRL, first we select a typical SR pre-trained network as a master branch. Next we sequentially train and add residual branches to the main branch, where each residual branch is learned to model accumulated residuals of all previous branches. We plug state of the art methods in IRL framework and demonstrate consistent performance improvement on public benchmark datasets to set a new state of the art for SR at only approximately 20% increase in training time.
Please view the full paper here
If you find our work useful, please consider citing:
@InProceedings{aadil2019irl,
title={Improving Super-Resolution Methods via Incremental Residual Learning},
author={Aadil, Muneeb and Rahim, Rafia and Hussain, Sibt ul},
booktitle={IEEE International Conference on Image Processing (ICIP)},
year={2019}
}
- Python (Tested with 3.6)
- PyTorch >= 0.4.0
- numpy
- scipy
- matplotlib
- tqdm
DIV2K - Agustsson et al. CVPRW 2017
Set5 - Bevilacqua et al. BMVC 2012,
Set14 - Zeyde et al. LNCS 2010,
B100 - Martin et al. ICCV 2001,
Urban100 - Huang et al. CVPR 2015.
Place the datasets under datasets directory, like so:
datasets/
benchmark/
Set5/
Set14/
B100/
Urban100/
DIV2K/
DIV2K_train_HR/
DIV2K_train_LR_bicubic/
X2/
X3/
X4/
Training IRL requires two following steps.
#RDN
python main.py --model RDN --patch_size 128 --epochs 200 --save RDN_x4 --reset --chop
#EDSR
python main.py --model EDSR --n_resblocks 32 --n_feats 256 --res_scale 0.1 --save EDSR_x4 --reset --chop
#EDSRb
python main.py --model EDSR --save EDSRb_x4 --reset
#SRResNet
python main.py --model SRResNet --save SRResNet_x4 --reset
#LapSRN
python main.py --model LapSRN --patch_size 128 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --loss 1*MSE --epochs 300 --save LapSRN_x4 --resetTrain the same way as original networks, except simply enable --enable_branches flag and mention some options.
#RDN
#branch1
python main.py --model RDN --patch_size 128 --enable_branches --n_branches 1 --half_resblocks --master_branch_pretrain ../experiment/model/RDN_x4.pt --loss 1*MSE --epochs 20 --batch_size 8 --save RDN_x4_b1 --reset --chop
#branch2
python main.py --model RDN --patch_size 128 --enable_branches --n_branches 2 --half_resblocks --pre_train ../experiment/RDN_x4_b1/model/model_best.pt --loss 1*MSE --epochs 20 --batch_size 8 --save RDN_x4_b1 --reset --chop
#EDSR
#branch1
python main.py --model EDSR --patch_size 96 --n_resblocks 32 --n_feats 256 --res_scale .1 --enable_branches --n_branches 1 --half_resblocks --master_branch_pretrain ../experiment/model/EDSR_x4.pt --loss 1*MSE --epochs 30 --save EDSR_x4_b1 --reset --chop
#branch2
python main.py --model EDSR --patch_size 96 --n_resblocks 32 --n_feats 256 --res_scale .1 --enable_branches --n_branches 2 --half_resblocks --pre_train ../experiment/EDSR_x4_b1/model/model_best.pt --loss 1*MSE --epochs 30 --save EDSR_x4_b2 --reset --chop
#EDSRb
#branch1
python main.py --model EDSR --patch_size 96 --enable_branches --n_branches 1 --half_resblocks --master_branch_pretrain ../experiment/model/EDSR_baseline_x4.pt --loss 1*MSE --epochs 30 --save EDSRb_x4_b1 --reset
#branch2
python main.py --model EDSR --patch_size 96 --enable_branches --n_branches 2 --half_resblocks --pre_train ../experiment/EDSRb_x4_b1/model/model_best.pt --loss 1*MSE --epochs 30 --save EDSRb_x4_b2 --reset
#SRResNet
#branch1
python main.py --model SRResNet --patch_size 96 --enable_branches --n_branches 1 --half_resblocks --master_branch_pretrain ../experiment/model/SRResNet_x4.pt --loss 1*MSE --epochs 30 --save SRResNet_x4_b1 --reset
#branch2
python main.py --model SRResNet --patch_size 96 --enable_branches --n_branches 2 --half_resblocks --pre_train ../experiment/SRResNet_x4_b1/model/model_best.pt --loss 1*MSE --epochs 30 --save SRResNet_x4_b2 --reset
#LapSRN
#branch1
python main.py --model LapSRN --patch_size 128 --rgb_range 1 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --half_resblocks --enable_branches --n_branches 1 --master_branch_pretrain ../experiment/model/LapSRN_x4.pt --loss 1*MSE --epochs 30 --save LapSRN_x4_b1 --reset
#branch2
python main.py --model LapSRN --patch_size 128 --rgb_range 1 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --half_resblocks --enable_branches --n_branches 2 --pre_train ../experiment/LapSRN_x4_b1/model/model_best.pt --loss 1*MSE --epochs 30 --save LapSRN_x4_b2 --resetFor each model (along with its 2 residual branches), evaluation scripts (on Set5) are mentioned below:
#LapSRN
#python main.py --model LapSRN --rgb_range 1 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --n_feats 64 --pre_train ../experiment/model/LapSRN_x4.pt --save test/Set5/LapSRN_x4 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model LapSRN --rgb_range 1 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --n_feats 64 --half_resblocks --enable_branches --n_branches 1 --pre_train /datadrive/sr-experiments/final_models/LapSRN_x4_b1/model/model_best.pt --save test/Set5/LapSRN_x4_b1 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model LapSRN --rgb_range 1 --n_channel_in 1 --n_channel_out 1 --n_layers 10 --n_feats 64 --half_resblocks --enable_branches --n_branches 2 --pre_train /datadrive/sr-experiments/final_models/LapSRN_x4_b2/model/model_best.pt --save test/Set5/LapSRN_x4_b2 --save_results --save_residuals --save_branches --reset --test_only --data_test Set5
#SRResNet
#python main.py --model SRResNet --pre_train ../experiment/model/SRResNet_x4.pt --save test/Set5/SRResNet_x4 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model SRResNet --half_resblocks --enable_branches --n_branches 1 --pre_train /datadrive/sr-experiments/final_models/SRResNet_x4_b1/model/model_best.pt --save test/Set5/SRResNet_x4_b1 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model SRResNet --half_resblocks --enable_branches --n_branches 2 --pre_train /datadrive/sr-experiments/final_models/SRResNet_x4_b2/model/model_best.pt --save test/Set5/SRResNet_x4_b2 --save_results --save_residuals --save_branches --reset --test_only --data_test Set5
#EDSRb
#python main.py --model EDSR --pre_train ../experiment/model/EDSR_baseline_x4.pt --save test/Set5/EDSRb_x4 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model EDSR --half_resblocks --enable_branches --n_branches 1 --pre_train /datadrive/sr-experiments/final_models/EDSRb_x4_b1/model/model_best.pt --save test/Set5/EDSRb_x4_b1 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model EDSR --half_resblocks --enable_branches --n_branches 2 --pre_train /datadrive/sr-experiments/final_models/EDSRb_x4_b2/model/model_best.pt --save test/Set5/EDSRb_x4_b2 --save_results --save_residuals --save_branches --reset --test_only --data_test Set5
#EDSR
#python main.py --model EDSR --n_resblocks 32 --n_feats 256 --res_scale .1 --pre_train ../experiment/model/EDSR_x4.pt --save test/Set5/EDSR_x4 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model EDSR --n_resblocks 32 --n_feats 256 --res_scale .1 --half_resblocks --enable_branches --n_branches 1 --pre_train /datadrive/sr-experiments/final_models/EDSR_x4_b1/model/model_best.pt --save test/Set5/EDSR_x4_b1 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model EDSR --n_resblocks 32 --n_feats 256 --res_scale .1 --half_resblocks --enable_branches --n_branches 2 --pre_train /datadrive/sr-experiments/final_models/EDSR_x4_b2/model/model_best.pt --save test/Set5/EDSR_x4_b2 --save_results --save_residuals --save_branches --reset --test_only --data_test Set5
#RDN
#python main.py --model RDN --n_denseblocks 16 --n_layers 8 --n_feats 64 --growth_rate 64 --pre_train ../experiment/model/RDN_x4.pt --save test/Set5/RDN_x4 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model RDN --n_denseblocks 16 --n_layers 8 --n_feats 64 --growth_rate 64 --enable_branches --n_branches 1 --half_resblocks --pre_train /datadrive/sr-experiments/final_models/RDN_x4_b1/model/model_best.pt --save test/Set5/RDN_x4_b1 --save_results --save_residuals --reset --test_only --data_test Set5
#python main.py --model RDN --n_denseblocks 16 --n_layers 8 --n_feats 64 --growth_rate 64 --enable_branches --n_branches 2 --half_resblocks --pre_train /datadrive/sr-experiments/final_models/RDN_x4_b2/model/model_best.pt --save test/Set5/RDN_x4_b2 --save_results --save_residuals --save_branches --reset --test_only --data_test Set5For other datasets, please see the file eval.sh.
- RDN
- EDSR
- SRResNet
- SRDenseNet
- LapSRN
- DRRN
- VDSR
This code is extended from Pytorch Version of EDSR who we thank