Fuser is the component of a laser printer; a bond toner that uses heat and pressure on the paper. However, it may show up the HP 50.2 fuser error due to overheating issues. The error message also refers to the timeout error. As a result, you fail to perform print tasks. By following our curated guide, you can solve HP printer fuser error 50.2 quickly.
Reasons behind HP Laserjet fuser error 50.2 and 50.3
A fuser is a pair of heated rollers. When a paper passes through it, it generates ample heat to melt the ink powder over the paper. It rolls out the printed paper to the output tray.
Also, you must have noticed that the upcoming papers are always hot. It is always at a high temperature but still, its thermostatic property prevents pages from burning.
Therefore, a sudden rise in the printer temperature leads to a 50.2 Fuser Error on HP Laserjet Pro 400, 200, m402, m402n, and m402dn.
Most importantly, the course of the fuser assembly is between 50,000-200,000 pages depending upon the printer model.
- While trying to print a document it is not held by your Laserjet printer or does not match.
- An unexpected increase in the heat of the printer leads to damage to fuser equipment.
- Maybe the operating system is spinning with a corrupt registry.
- When the power circuit of the printer not working properly or starts functioning terribly.
List of Fuser error codes 50.0, 50.1, 50.3, 50.4, 50.5, 50.6, 50.7, 50.8, 50.9, 50.11
You could meet several types of fuser error codes on your HP printer. The codes written below are all linked to these kinds of problems. Let’s know what certain error codes mean:
- 50.9 error – The wrong installation.
- 50.8 failure – High temperature of thermistor (TH2).
- 50.7 problem – Low temperature.
- 50.6 issue – Low temperature of thermistor (TH2).
- 50.5 failure – High fuser temperature of the thermistor.
- 50.4 problem – Drive circuit failure.
- 50.3 issue – High temperature of thermistor (TH1)
- 50.2 fuser error – Warm-up service in HP Printer.
- 50.1 problem – Low temperature of thermistor (TH1).
Best ways to fix HP printer fuser error 50.2
Resetting or replacing the fuser of your printer is beneficial to solve HP printer fuser error 50.2. There are other helpful tips to solve the fuser error. For example, you should examine the power source and keep the printer in the right environment.
Make sure you remove unwanted objects from your HP printer to avoid heat problems. If there is a queue for the print tasks, cancel them all to avoid inconvenience. If you still face an HP 50.2 fuser error, restart your printer. Read these solutions with step-by-step instructions and implement them carefully.
Solution 1: Reset printer fuser
The easiest way to fix HP printer fuser error 50.2 is to reset the fuser. All you are required to do is power off the machine, disconnect cables, and reinstall the fuser. As you do so, make sure you check that the fuser is properly installed.
- First, turn off the printer and unplug all its connection cables.
- Now wait for a minute and then open the exterior lid of the printer.
- Try to Slide out the fuser to take it out from the printer. Make sure it is at normal temperature while ejecting it.
- Examine the fuser if there is any paper inside it. If you find one then remove it carefully.
- You need to clean if you find any jammed ink around the fuser unit. It will ensure the more reliable performance of the printer.
- Then, It’s time to put the fuser back into the printer. Ensure the accurate placement of its slot.
- Close the door and now make all the cable connections with the device.
- Finally, turn on your printer and wait for it to remain idle and silent.
Once you reset the fuser, you should stop seeing the HP 50.2 fuser error. However, if you are still facing the same issue, you can restart your HP printer.
Solution 2: Restart your HP LaserJet printer
By restarting the HP Laserjet series printer, you can avoid bugs or minor errors. HP printer fuser error 50.2 can also be fixed if you turn off the printer machine, remove all the cables, connect them back after 5 minutes, and restart your printer.
- Firstly turn off your HP printer.
- Then eject the power cable from the rear end.
- Now you need to wait for around 25 minutes and after that make all the connections as it were.
- Now turn ON your printer. Wait for the device to start.
- Try to print again.
Make sure you let your printer start properly and then continue using it the regular way. This should fix the faults now. If it does not, try more solutions to resolve the HP 50.2 fuser error.
Solution 3: Keep the environment in check
It is important to ensure where your HP printer is placed. The unsuitable location of your printer may lead to fuser error. If you are facing a 50.2 fuser error on HP LaserJet Pro m402n, there is a probability your printer is affected by heat. In that case, you can change the location of your printer and keep it in a cool place so it can function properly.
Solution 4: Replace the fuser assembly of your HP printer
In case you are not getting results even after executing the aforementioned repairing methods, try replacing the fuser. In some instances, the fuser is corrupted or damaged. This may result in a 50.2 fuser error on HP Laserjet Pro 400, 200, and m402n series printers. In that case, replacing the fuser is the best choice.
Solution 5: Stop printing jobs to fix the HP printer fuser error
The fuser of your printer can take a load due to printing jobs pending in the queue. As an outcome, you confront a 50.2 fuser error on the HP Laserjet Pro 200. To avoid such a problem, learn how to cancel all print jobs on HP printer.
- If you use a printer with buttons, use the Cross button.
- Those who have touchscreen printers can tap on the Stop, Cancel, or X icons.
After canceling the printing tasks, you can restart your HP printer. This easily resolves the HP 50.2 fuser error.
Solution 6: Keep unwanted objects away from the printer
Certain objects placed near your printer may cause unexpected issues. HP printer fuser error 50.2 is one of the reasons that your printer is surrounded by objects that should not be present around the machine. Thus, you have to be sure that your HP printer is not surrounded by unwanted objects.
Besides, you can maintain the quality of your printer. Following are the instructions that can be considered:
- Make sure there is ample space between the printer machine and the wall or furniture.
- Objects or other devices should be away from your printer to avoid overheating issues.
- Also, your printer should be away from books, paper sheets, and files.
The more you maintain your printer, the more it stays in healthy condition. This will help you to avoid unnecessary errors such as the 50.2 fuser error on HP printers.
Solution 7: Check the power cord, electric connection, & voltage
To fix the HP 50.2 fuser error, it is important to examine your electric connection, power cables, and voltage as these may affect your printer machine’s fusor. It may also happen due to the damaged or loose power cable. As a result, it drives the irregular transmission of power that causes the power line to malfunction.
Below are a few tips you should go through to keep things right:
- The power voltage should be according to the requirement of the device.
- Make sure you do not connect the machine with the power strips of other devices.
- Also, note that it is not advisable to connect your device with other devices and connect to the high-powered electric connection.
- The printer’s power cord plugs directly into the wall socket.
- Make sure you use a plug designed for printers as the printer’s power plug as it carries a broad range of power to the device.
As you follow these instructions, the unwanted errors no longer appear on your screen.
This article is for HP LaserJet Pro 400, 200, m402n, p1102, and m402dn printers listed below:
- HP Laserjet pro m402n, m402dne 50.2 fuser error
- 50.0 fuser error HP Laserjet p1102, m1005, p2035
- HP 50.0, 50.1, 50.2, 50.3, 50.4, 50.5, 50.6, 50.7, 50.8, 50.9, 50.11 fuser error
- 50.2 fuser error HP Laserjet pro 400, 200, m402dn, m402n, m402
In conclusion
Fuser error occurs due to its heat. However, there can be other reasons as well. By performing the troubleshooting methods shared above, you can get rid of the HP printer fuser errors.
