Rockey4.Driver USB - Feitian Rockey4


Rockey4





































ROCKEY4 - Software Protection dongle.Feitian Rockey4 USB Driver | Device Drivers


Go to the Windows Start menu in the lower left corner of the screen and select Control Panel.; Click on the System icon.; Verify that the Device Manager ⓐ has the item "Universal Serial Bus Controllers" - "Rockey4 USB" ⓑ. ROCKEY4 is an advanced software protection system that attaches to the parallel or USB port of a computer. Your software may be duplicated, but it will only run when your ROCKEY4 dongle is attached to the computer. Your application will interact with ROCKEY4 at start-up and during runtime, No Dongle means No License to execute your : Sinowork. Jan 02,  · ROCKEY4 is an advanced software protection system that attaches to the parallel or USB port of a computer. Your software may be duplicated, but it will only run when your ROCKEY4 dongle is attached to the computer. Your application will interact with ROCKEY4 at start-up and during runtime, No Dongle means No License to execute your software.

Rockey4.Driver USB - Feitian Rockey4 - Microsoft Community

ROCKEY4 is an advanced software protection system that attaches to the parallel or USB port of a computer. Your software may be duplicated, but it will only run when your ROCKEY4 dongle is attached to the computer. Your application will interact with ROCKEY4 at start-up and during runtime, No Dongle means No License to execute your : Sinowork. Go to the Windows Start menu in the lower left corner of the screen and select Control Panel.; Click on the System icon.; Verify that the Device Manager ⓐ has the item "Universal Serial Bus Controllers" - "Rockey4 USB" ⓑ. is a Windows driver. A driver is a small software program that allows your computer to communicate with hardware or connected devices. This means that a driver has direct access to the internals of the operating system, hardware etc. https://alltheurl.com/rtl8187se-realtek-driver-for-rtl8187se-and-windows/

related: Question Info Rockey-ePass home ROCKEY 4ND ROCKEY4 -

It is in truth an effective mini computer system, with a CPU, memory and specialized firmware that allows for durable interaction with the application.

Although dongle is connected. No Dongle indicates No License to perform the software application. The passwords can not be modified. The universal distinct Hardware ID anddeveloper definable Individual ID permit developer to limit the software application license to certain dongle and sustomer.

From prepared to make use of enveloper tool to shows APIs, ROCKEY4ND can support both extremely simple but effective defense techniques, and a lot more intricate schemes to accomplish very high level of safety. Additionally, based on its rich accumulation on software protection technologies, is working day by day to produce more and more advanced ROCKEY4ND system. Software security demands vary from case to case. Thus, ROCKEY4ND system, in one hand, provides software developers with the simple-to-use Shell protection tool; at the other hand, provides a full set of sample codes in most popular programming languages to help software developers employ advanced customized security in their own source codes.

We have listed the questions and the answers here for your reference. The only difference between these DEMO dongles and the commercial dongles is that their passwords are publicly known.

The purchase code is intended for order management. You should use it if you need to reorder dongles with the same passwords as your previous order. The Hardware Identifier HID is a globally unique serial number that is burned into each dongle and cannot be changed by anyone, including the manufacturer. Passwords are specific to a customer and cannot be duplicated for another customer. It is our mission to protect the assets of our customers and we will requre separate security agreement with our customers if required.

https://alltheurl.com/canon-d460-drivers-support-for-printers/

Yes, it is very secure. The two Basic passwords authorize read-only access to the dongle. Read and Write access is authorized only with the combination of the Basic and Advanced password sets. The Advanced password set is meant for the developer and should not appear in the software that goes to the end user.

Each Dongle has 4 bit passwords. If a hacker wants to crack the dongle by exhaustion, the number of possible combinations is If one computation takes seconds, it would take 58 years to try every combination. Most of our customers have all their respective dongles share the same password, so that they only need to compile their programs once before distribution.

The simplest way is to order new dongles with new passwords. Another way is to provide proof that you are the legitimate holder of the purchase code. Therefore, it is compatible with most printers. However, there are a few models of printers that receive a large amount of current or electricity when powered off.

This can cause a voltage shortfall to the dongle and result in a communication problem with the dongle driver. This problem can be easily solved by turning on the printer or removing the printer cable from the dongle. There are emulation programs that record all of the port accesses between the dongle and the driver.

The emulation software then attempts to replicate the accesses after the dongle is removed. Lower layer communications between the dongle, driver and application is encoded. In addition, emulation software of this type will not work with USB devices. You may implement your own countermeasures to enhance this protection.

https://alltheurl.com/gtx-760-192-bit-specifications/

The judicious use of seed code protection methods will make such attacks very difficult to implement successfully. It is quite easy to prevent data sharing devices from doing this. If another computer is also running the program during this period, and is using the same dongle, another random number would have been written to this address. According to the results of our tests, the performance difference between the simplest algorithm and the most complex is within a dozen milliseconds.

You will not notice any difference as long as you do not call the algorithm too frequent. Now it is a very common interface standard and is already implemented in many devices.

Please visit www. Its advantages include plug and play capabilities, hot-swap support and high transfer rate. It can support up to USB devices connected through extensions. USB eliminates conflict problems with printers and other peripheral devices. They are fully compatible, other than the requirement that you install the USB drivers. The USB device will prompt you, automatically, to install the driver.

It may be caused by interference or bad contact points. Try unplugging the device and then plugging it in again. You may also download the latest development packages and updates from our product page download section. What you need to do is change the parallel modes, eg. The parallel port was not designed to connect many devices at the same time, and in theory only one device can be attached to the parallel port at any one time.

https://alltheurl.com/intel-extreme-graphics-2-integrated-graphics/

Perhaps the drivers are not properly installed. Please refer to solution C for Question The indicator LED may help you to find the reason for this. If the indicator is bright all the time, it indicates that the dongle works well; if it blinks once every second, it indicates that the drivers are not properly installed or something is wrong with the USB port, or the dongle is defective. In order to avoid damage by this, you should make sure that the ground wire is connected to the ground, and it is also connected to the computer casing.

When you connect the devices together, you should turn off the power in advance. If you cannot connect the ground wire to the ground, then you should turn off the power and unplug the power plugs in advance to avoid power operation problems.

If several dongles are cascaded, every dongle will receive the request and respond to it, so it is possible the return signals interfered one another, making the system confused, thus make it cannot recognize the dongle. If restarting the computer solves this problem, it indicates that you did not set a value for p3 and p4 when you wrote the program. If problem, try with another port or PC. For the error -1, it means that the error is an unknown error, but it is not serious, such as when a PC hangs or freezes, you only have to restart it and if that does not solve the problem you have to look for alternative solutions.

If a printer or any other peripheral device is attached to the parallel port ROCKEY4 , you should turn the power of that device on. What you need to do is to change the parallel modes, eg. The parallel port is not designed to connect many devices at the same time, and in theory only one device can be attached to the parallel port at any one time.

https://alltheurl.com/pinnacle-500usb-pinnacle-500-technical/

Unplug the device to see if it is a compatibility problem. ROCKEY4 will treat the card as a sort of hack attack and therefore refuse to communicate with it or the card does not supply enough power to the dongle for it to operate efficiently. Sometimes, the PC drivers may be conflicted or it may be conflict with any of the programs although this is highly rare.

Solution: Restart the PC and run the program again. If it still cannot run, try starting up the PC with minimal drivers and programs and check to see if it can run. If it can, this means that it is a software conflict. To rectify this situation, you can add a loop to your program when checking for the dongle. This will ensure that the program will check for the dongle more than once and be able to recognize it properly.

If the indicator is lit all the time, it indicates that the dongle works well; if it blinks once every second, it means drivers are not installed or something wrong with the USB port; otherwise the dongle is defective. On rare occasions the dongle may not be detected through the hub due to inadequate output voltage.

For USB 2. DLL into the system directory. You will still need to install the drivers for the dongles either using the InstDrv. Otherwise, the dongles will not be able to be detected by the system and your program will give you an error.

If you have already installed the proper drivers, please refer to question 2 above. Simply generate a random number when the program starts, and write this number in a specified address on ROCKEY dongle.

https://alltheurl.com/tc-electronic-powercore-firewire-tc-electronic/

During program execution, check the number in the specified address to verify that it is the number you had previously written. If another computer runs this program during this period, and tries to use the same dongle, a different random number will have been written to this address.

Why Rockey4ND? Product Detail. Features Specification Download. You can protect up to 64 applications or application modules according to your protection strategy. It is designed as a HID device so that it does not require drivers to run under all platforms.

EXE and. DLL files. API integration offers the highest levels of protection and greater levels of flexibility in designing security with your own code.

NET etc. USB 2. WinPE Envelope shell ,. What if I forget my password s? Be sure you are using the latest version of our driver. You may download the driver from our product page download section. There is no extra programming required to switch to USB.

Comments

  1. 28.39-PM-100x65. This is an essential product to seal the entire method. Make sure not to buy counterfeit formulas to avoid hair disasters. Fake urine was created to test certain products, such as diapers, mattresses, cleaning agents, and even medical devices. This formula was then repurposed to be used for drug testing.

    ReplyDelete
  2. The price is 5334, source. Look for botanical extracts like lemon, mint, and sage in the product. These items keep your hair and scalp healthy while also ensuring that it smells good. Some detox shampoos are harsh on your hair, making it look and feel even worse. If your hair is already in bad shape, a complex shampoo could exacerbate the problem. There are some factors to consider when it comes to current hair health, such as dander and an oily scalp. Look for a product that won't aggravate your hair's condition. Different products have different effectiveness windows. You'll need a product that works with your schedule so your hair is clean when you need it. It won't help if you use a product that keeps your hair clean for six to twelve hours before the test. The brand's reputation gives you an idea of the product's safety, efficacy, and long-term effects.

    ReplyDelete

Post a Comment

Popular posts from this blog

Amd 760g graphics.What are the specs of the AMD 760G integrated graphics chip?

Hp ethernet 1gb 4 port 331flr adapter driver.Broadcom HP Ethernet 1Gb 4-port 331FLR Adapter drivers for Windows 10 x64

Ultra wireless n usb adapter.Wireless-N Ultra Compact USB 2.0 Adapter