Features

Three-Way Driver Design: The PSB Synchrony T600 floorstanding loudspeaker employs a three-way driver design that features a 1" titanium dome tweeter, one 5.25" carbon fiber midrange driver, and three 6.5" carbon fiber cone woofers in a transitional-array configuration. The T600's transitional-array design places the tweeter below the midrange and the three woofers below the tweeter. The placement of the tweeter below the midrange driver provides greater flexibility in listener position; tonal balance remains consistent whether the listener is seated or standing. The 3-way, transitional-array driver design also narrows the frequency band to optimize each driver's capability for dynamic full-range sound with impactful bass, transparent midrange, and accurate high frequency detail.

• 1" Titanium Dome Tweeter: The 1" titanium hard-dome tweeter features ferrofluid damping and a neodymium magnet allowing for higher sound pressure levels, without causing dynamic compression or increasing harmonic and intermodulation distortion. The result is crisp, clear, and detailed high frequencies.
• 5.25" Midrange Driver & Three 6.5" Bass Woofers: The 5.25" midrange driver and three 6.5" woofers feature a woven carbon fiber cone that combines low mass and high rigidity which results in wider bandwidth (about a 1/2-octave lower than previous PSB driver designs), higher efficiency (91dB @ 1m), better power handling, and lower distortion. The cone's rubber surround has mass added to the junction with the cone to suppress unwanted reflections which results in smoother response. The highly rigid cast aluminum basket resists flexing, and is unaffected by cone motion. The advanced motor structure of the cone maintains constant magnetic force throughout the voice-coil gap to reduce harmonic and intermodulation distortion.

Linkwitz-Riley 4th Order Crossover: The PSB Synchrony T600 floorstanding speaker utilizes an amplitude-perfect Linkwitz-Riley 4th order crossover network that features high-voltage polyfilm capacitors and oxygen-free interconnect wire for complete driver control, smooth frequency response, and seamless transition between the tweeter, midrange driver, and woofers for a "True-to-"Nature" sound that PSB is known for.

Bass Reflex MDF Cabinet: They Synchrony T600 floorstanding loudspeaker features a bass reflex cabinet with three rear-firing ports that regulate air compression in the cabinet. The cabinet is constructed of MDF and is heavily braced with a decoupled aluminum-clad front baffle to maximize rigidity for uncolored, natural sound. The extensive internal bracing minimizes resonances that can cause uneven response and blur transients. The front baffle is clad in a 5mm-thick solid aluminum plate and decoupled from the enclosure with ten isolation cups to minimize "baffle-talk" that can obscure fine detail. The enclosure is divided into four chambers - one sealed chamber for the midrange driver and tweeter, and three identically tuned rear-ported chambers, one for each woofer. This breaks up standing waves inside the enclosure that could otherwise cause uneven response and distortion. The speaker cabinet is available in a satin walnut veneer or high gloss black finish with an acoustically transparent, magnetically attached black cloth grille.

Triple Binding Posts: The Synchrony T600 is outfitted with three sets of heavy-duty, gold-plated binding posts allowing you to tri-amp, bi-amp, tri-wire, or bi-wire the floorstanding loudspeaker. These binding posts ensure a secure connection to many types of cable and connectors. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-lugs and bare wire (up to 10AWG). Plastic caps will need to be removed from the binding posts to use banana plugs.

• Tri-/Bi-Wiring: Tri- or Bi-wiring can provide noticeable improvements in the overall transparency of the loudspeaker. You'll run separate speaker wires to the low, mid, and high frequency drivers from a single amplifier.
• Tri-/Bi-Amping: Tri-/Bi-amping allows you to use separate amplifiers for the high, mid, and low frequency sections of the loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.

Custom Isolator Feet: At the base of the T600 are four outrigger stabilizers with custom isolators based on IsoAcoustics' award-winning Gaia II isolators. These prevent mechanical energy produced by the drivers and cabinet from being reflected back into the enclosure. Along with the outrigger stabilizers, the isolators provide a high degree of speaker isolation and control, while resisting lateral movement and oscillations to maintain accuracy and alignment with the listening position. Internal reflections with the supporting surface are attenuated resulting in greater sound clarity and openness. The result is improved micro-detail, clearer transients, a wider soundstage, and more precise imaging. The isolator feet must be installed and can be used on carpet or hard-surface flooring.

PSB Synchrony Series: PSB's flagship Synchrony Series consists of the T600 floorstanding loudspeaker and the B600 bookshelf loudspeaker (sold separately). PSB's Synchrony Series has been acknowledged worldwide for its consistence and outstanding audio performance. The Synchrony Series continues PSB's "True-to-Nature" design philosophy by balancing the scientific principles of sound with an honest acoustic design.

Canada's NRC (National Research Council): Like all PSB loudspeakers, the Synchrony Series is designed and engineered at the world-famous acoustics lab at Canada's National Research Council (NRC) by a team of highly regarded acoustic specialists guided by renowned PSB Speakers founder and chief acoustic designer, Paul Barton. In addition to measuring loudspeaker performance in the NRC's anechoic chamber, PSB used advanced tools such as scanning laser vibrometer, finite-element analysis, and electro-acoustic computer modeling during the Synchrony Series' 2-year development process.