Thinking to get furnace or heater installation Houston, TX? When the furnace is turned off for a whole season would undergo much stress that it can be deposited with dirt and dust heavily. Ensuring few checks before turning on the furnace will enable the unit to run properly without any heater repair Houston, TX. Here is the list of few checks to be made, have a look!

One can ensure the following even before having a new heater installation Houston, TX.

• Make sure to have a thorough inspection of the turned-off furnace. The furnace should be free of any black smut which is the residue caused due to combustion. The duct system is also checked for any gaps or holes. Loose connections are checked and tightened and also the gaps are sealed with metal tapes.
• The furnace should be free from unwanted items that block the normal airflow of the unit. Make sure not to place any kind of combustible goods like paper or rages near the unit. It is also compulsory for flammable products to be away from the unit.
• Ensure to clean every accessible part of the furnace using a brush or vacuum. Clean the pilot light thoroughly free from residues. Make sure not to damage any parts.
• If your furnace has an air filter that can be removed and replaced, change the old filter with a new one. One can find the right size of the filter from the manual provided by the manufacturer. If your furnace has an air filter that can be reused, remove it carefully, dust it with a vacuum, and replace it. One can also clean the filter using soap and water, let it dry, and replace it.
• If the furnace has a blower, the belt of the blower should be checked inspected for cracks. Replacing the belt just requires removing a couple of bolts and should be pressed downwards.
• Make sure that the room has enough ventilation facilities for the air to flow in and out of the place freely. 
• The drainpipe that leaves out the excess water formed from condensation can be deposited with dirt which needs to be cleared. Make sure to clear it before turning on the furnace.
• The exhaust and vents should be clean and clear for free passage of air.
• The carbon monoxide detector in the furnace is an important element that must be checked for proper functioning without any furnace repair Houston, TX.

Turn on the furnace only after ensuring the above checks, and for any more doubts or clarification even on AC services Houston, TX, contact Wrightway Comfort.