Info provided by Flowright Plumbers Woking:

It is all too easy to panic if no water comes out of your tap. But before you freak out and call an emergency plumber, there are a few tips you can try to fix the issue.

1. Check for Blockages

Your tap problems could be the result of a blockage in the plumbing pipes. Clogged pipes are often the result of sediment build-up that blocks the water flow. A plumber can perform a drain inspection to identify the cause of blockage and use a high pressure jet to clear it.

2. Inspect for Dislodged or Damaged Tap Washer

Your tap washer might be dislodged or damaged and this is why no water comes out of your tap when you turn it on. You will have to replace your washer or repair it as soon as you notice the issue to prevent more serious tap troubles.

3. Check for Any Frozen Pipes

Your pipes might have frozen and this is why no water is coming out in the first place. You can try to unfreeze it with a hairdryer for the water to flow again.

4. Look for Leaks

One of the most common reasons why no water comes out from taps is because of leaks. Check the water supply lines of your home for any dents or drips.

5. Watch Out for Rust

Rust could be another reason why your taps stopped working all of a sudden. Get a new faucet to replace your old tap if it already gathered rust on both its exterior and interior parts.

6. Check Your Other Taps

Try opening other taps around the house to see if water comes out of them. If the rest of the taps are working just fine, it means that you only have one faulty tap. If this is the case, all you have to do is dislodge the blockage inside the pipes or replace your faulty faucet.

7. Ask Your Neighbours and Supplier

When no water comes out of all your taps, it often means that the service was turned off by the water supplier. It could be due to different reasons like onsite maintenance or forgetting to pay the water bill.

Before you contact the supplier, don’t forget to ask your neighbours if they are also experiencing the same issue. If yes, it means that there is a bigger and wider scale problem. Call your water supplier to inquire why the service was shut off and when it will be turned back on.

8. Check for Hot Water

You can determine what causes your tap issues if you check your hot water. Your water heater is probably broken if only cold water comes out of your tap and no hot water.

9. Check the Water Main

Make sure that the water main is open if no water comes out of your tap. A closed main valve will prevent water from running through the mainline and your faucets as well. Open your main valve then try opening your taps again.

10. Consider the DIY Installations You Made

Finally, the problem could be the result of problems with your DIY installations. Poor installation may result to damaged faucets or leaks that may prevent the water flow.

Follow these tips and you’ll have water coming out of your tap again in no time.

It may require more effort to unclog a slow-draining toilet compared to clearing one that is already totally stopped up. This problem often happens because of an issue further down the line. This can also indicate that there is something wrong in a different part of your plumbing system altogether.

If your toilet is slow draining, there are a few things you can do on your own before you call in the plumbing experts.

Try Chemical Drain Cleaning Products

These products might be the simplest solution but remember that these might not really be your best option. Toxic chemical reactions may occur once the products come into close contact with different materials.

It is important to open a window first before you use these products. These might also produce fumes that could be dangerous for pets and small children. Always read the warnings, follow the instructions, check the possible side effects, as well as the chemical interactions you need to avoid.

Apply Enzyme Cleaning Products 

For persistent clogs and you are sure that there is nothing lodged in your drain like your kid’s toy, you can use enzyme cleaning products meant to break down organic matter in drains and pipes. You can buy these drain cleaning products online or at your local hardware store.

Unlike their counterparts that are chemical-based, enzyme cleaning products are eco-friendly. Make sure you read first the instructions before you proceed. Follow them carefully to avoid causing any unwanted harm to the plumbing system.

Go for the Liquid Soap and Hot Water Trick

The good old liquid soap and hot water trick may sound unconventional but this remains to be effective depending on the scale of the obstruction and blockage in your toilet. This is based on a rather simple concept. By lubricating the clogged area then hitting it with hot water, the blockage will loosen up, allowing your toilet to flush properly all over again.

Use a Plumbing Snake

You can also fix a slow draining toilet with the use of a more advanced method – the plumbing snake. Plumbing snakes are very flexible tools with substantially longer reach than your traditional toilet cleaning wire. Investing in one is a good decision so you can have something to use if ever the same problem happens again.

Stick with Your Plunger

Yes, the tried and tested toilet plunger definitely belongs to this list. For many decades, plunging the toilet is probably your go-to method when minor clogs occur. Although it will take some effort, this can still do the job and work almost immediately. Just don’t forget to wear a pair of rubber gloves if you got them for sanitary reasons and keep the surrounding floors protected from overflow if the water line is a bit too high.

Now that you know the different options you have to unclog your slow draining toilet, you can try each one of them first to determine the best hack that will work for you and your toilet. If all else fails, don’t hesitate and call the experts to fix the issue for you.

Info provided by Flowright Plumbers Woking:

You probably hear about water pressure a lot but do you have any idea what it is in the first place and why it is important for your UK home to have the proper water pressure?

Water Pressure Defined

Water pressure determines the water movement through your home’s pipes and out of your shower or taps. The amount of water pressure in the mains will mainly depend on your location in relation to the nearest supply, typically a reservoir.

Why Your UK Home Needs Proper Water Pressure

Maintaining your home’s proper water pressure is as equally important as the blood pressure of your body. It will be a cause of concern if the pressure gets too low or too high.

Many homeowners usually nitpick about low water pressure but high pressure may lead to expensive damages. Every residential home has a different pressure level but it is recommended to maintain 60 PSI or pounds per square inch.

Water pressure must never go more than 80 PSI. Something higher may lead to major appliances, such as toilets and water heaters, to stop functioning properly due to the stress on plumbing as well as other parts.

Water pressure is a crucial factor all throughout the year, but even more so during winter season.  Water is usually taken for granted, with most of you expecting that water will be flowing out of your taps immediately.

If water slowly or inconsistently comes out of your taps, this might indicate that the water pressure is too high or too low. If the water pressure is too high, this may lead to leaks in the pipes since they are unused to these high pressure standards. But, when the water pressure gets too low, you might have a hard time getting any water from your taps in the first place. This will definitely not be enough for taking a quick shower or filling the bath tub. If you are looking for reliable bathroom fitters then follow the link.

The water pressure in your home must have the correct balance because this will ensure that your pipes won’t burst or dry up. The proper water pressure will also keep the drains and pipes functioning as they are meant to during the cold winter months. It will help lower the risks of your pipes cracking and freezing as the flow of water can help indicate this as well.

High water pressure all over your house can lead to wasted water, pipe damage, and leaks. The most common sings of high pressure include the following:

• Moisture spots from leaks or drips

• Short-lived water heater, dishwasher, or washer

• Recurring or constant leaks in appliances as well as other fixtures

• Consistent breakdown of appliances that take in water such as dishwashers and ice makers

• Small leaks, holes, or cracks in lines or hoses

• Loud sounds like knocking or banging noises that come from the plumbing

• Toilet problems

• Spitting noises when faucets are turned on

You can buy a test gauge from the local home improvement shop and follow all instructions to help you test the water pressure in your home. You can also invest in a pressure regulator if your home’s water pressure fluctuates often.

Nothing is worse than having a broken boiler, especially when it is freezing cold outside. To ensure that your boiler won’t leave you chilly just when you need warmth the most, there are several tips to remember on how to maintain your boiler UK.  Alternatively, you contact one of our plumbing contractors to either repair or fit a new boiler.

Install and Set the Timer on a Room Thermostat

Now is the time to fit a room thermostat if you don’t have one yet. Come up with a plan and set your timer when you will need the boiler to work throughout the day. Doing so will ensure that the boiler doesn’t work hard in times when you don’t really need it in first place.

Modern boilers allow you to leave your home unheated when it is empty and programming the unit to heat the house 30 minutes before you need it. It will keep your home warm enough when it matters.

Keep Your Boiler Clean and Clear

Use a damp and soft cloth to wipe your boiler and dry it afterwards. For boilers located in a cupboard, make sure that you allow the recommended clearances of the manufacturer to allow safe access and servicing of the device. It is also important to ensure that there are no blockages in the grilles, flues, and air vents.

Avoid removing the case. Only Gas Safe registered engineers have the legal qualification to remove the casing of boilers. Call a professional if you suspect that there is an issue with your unit. Doing it on your own with gas can be perilous and may result to leaks, carbon monoxide poisoning, fires, and explosions.

Maintain the Hot Water Cylinder

Set the cylinder thermostat at 60°C or 140°F. It is already hot enough for killing off dangerous bacteria present in the water. However, you still have to be careful because this is still hot enough to scald.

You can install a thermostatic mixing valve for extra safety to automatically make sure that your tap’s hot water is at a safe temperature. You can easily lag your tank yourself if it is not insulated. You can also insulate the surrounding hot water pipes.

Turn Down Your heating

You can try to turn down your room thermostat by one degree and leave this for on a day. You can turn it down a degree further if it still feels warm enough for you. Continue to do so until you already feel somewhat too cool then turn this back one degree up again.

Monitor the Boiler Pressure

One more way to make sure that the central heating system performs well is to check to see if your boiler pressure is too low or too high. You will need to re-pressure it if the pressure is much lower than what it must. On the other hand, it will require bleeding if the pressure is too high. If you have no idea how to do this, you can always get the help of a Gas Safe registered engineer.

These are some of the things you need to do to properly maintain your boiler and keep it in top shape so you never have to wake up freezing cold ever again.

Opinion of Flowright Plumbers Woking:

Do you feel like you need a haircut pretty soon? Well, you don’t need to worry because the following are 3 of the best barbers in Woking where you can freshen up your looks and feel young all over again.

1. Hair Lab Hairdressers & Barbers

The team of professional stylists at Hair Lab is always happy to welcome clients. They create the best hairstyles for all men whatever their hair type or texture might be.

All stylists at the barber shop have extensive knowledge and experience when it comes to different cutting techniques to create both classic and trendy hairstyles. They recommend their clients to book a complimentary consultation for them to assess your hair first and your own sense of style to come up with the best look especially made and tailored for you.

It doesn’t matter if you want to cut your hair short, you prefer to have the classic short sides or back or you have a long hair, getting a good hair cut is guaranteed to boost your confidence and give you your much needed style transformation.

At Hair Lab Hairdressers & Barbers, you can be sure that you will leave the shop looking on point each and every time.

2. Headcase Barbers

Headcase barbers provides male grooming and barbering in the exclusive luxury retreat in Woking that perfectley combines the atmosphere and comfort that you can expect from a traditional barber shop.

The barber shop is the ultimate one-stop grooming emporium not only for men in Woking.

Some of their services include hair treatments, haircutting, colouring, men’s shaves, grey blending or camouflage, hair removal, facial detox, hair removal, and other service packages.

By effortlessly blending in the ambience and cosiness of a barbers with the overall sense of wellbeing and vitality of a grooming spa, you can expect Headcase barbers to provide the unique kind of environment where clients can enjoy utmost relaxation and get a very good haircut.

3. Mavericks Man Barber Shop

Mavericks is a hairdressing salon and barbershop that you can find right in the heart of Woking and provides five-star services to their valued clients. Their skilled and friendly team makes use of the latest equipment and techniques to meet and even exceed your expectations each and every time.

For the past decade of being in the business, Mavericks has received thousands of positive reviews from their happy and satisfied customers.

The barbershop offers amazing discounts throughout the week for their services that are done by their skilled and experienced stylists. It doesn’t matter if you want to get your much needed haircut, skin fade, beard trim, colouring or treatments, the barbershop always loves to see their clients whether they have visited for a total restyle or just to freshen up for the day.

So, the next time you want to pamper yourself and get the relaxation and rejuvenation you need and deserve, make sure to visit any of these top 3 barbers in Woking.

A boiler that doesn’t fire up can easily ruin your day.  After all, you won’t have heating and hot water available.

Good thing that there are a few simple checks you can do on your own for your boiler to ignite all over again. However, it is still important that you talk to a professional boiler engineer before you take any action.

There could be many reasons why your boiler doesn’t fire up your heating system. It can be very risky for unqualified people to fix their boilers, particularly if you have gas boilers. The law requires that only a qualified gas safe registered engineer is able to fix gas boilers.

If your boiler doesn’t fire up, simply switching it off then on again will be able to fix the problem. Below are other steps you need to take to make your boiler functional all over again.

Bleed Your Radiators

In order to do this, first, make sure that you switch off your central heating system. The radiators must all be cool first. Use and attach the radiator key to the valve. Get a piece of cloth and slowly rotate the key in counter clockwise direction. A hissing sound will be heard and this indicates that gas is already escaping from your radiator. You should close off the valve again when you are finished.

Check All the Basics

See to it that you got enough credit in the prepayment meter. Inspect if the rest of the appliances running on gas are all working just fine. Check your fuse box to be sure that the switches didn’t trip. It may be easier to call a plumbing company to take care of all the checks for you.

Examine the Pressure Gauge

Look closely at your boiler’s pressure gauge. How many bars are there? The pressure is low if it only shows on bar or less. If this is the case, all you have to do is just increase the pressure for your boiler to fire up all over again.

If the indicator is less than 1, this means that the water pressure is extremely low. For you to re-pressure your boiler, search for the filling loop that you can often find at the lower portion of the unit. As you change the pressure, don’t forget to turn off your boiler first. You can then open the valve.

You will hear the water as it fills into the system that will bump up the pressure indicator. Make sure that you close the valve once the pressure gets to 1.5. You can now turn on your boiler.

Turn the Thermostat Higher

If your thermostat is less than 21 degrees, it might prevent your boiler from heating up the house. You can crank it up to more than 21 degrees for your boiler to start functioning again.

Reprogram After Power Cuts

If there was a power cut recently, it is possible that the boiler’s timer has reset itself. You simply need to reprogram this with your time zone for it to work all over again.

Reset Your Boiler

There times when a reset is the only thing your appliance needs. There are no mechanical faults of breakdowns. You just need to put your appliance to sleep for a few seconds. Simply turn off the power supply then wait for 60 seconds before turning it on. Your boiler should be working fine once more.

Opinion of Flowright Plumbers Woking:

Woking is a historical town that boasts of modern-day ambitions where you can find a wide selection of great places to dine in. If you ever find yourself wandering around the streets of this lovely town, here are top 5 best restaurants in Woking where you can fill your tummy and satisfy your taste buds.

1. Beit Beirut

Beit Beirut is a highly rated Lebanese restaurant in Woking. Ever since they opened their doors in 2019, the restaurant offers an amazing atmosphere and boasts of a menu that includes salads, hot and cold mezza dishes, and a variety of main menu.

Hospitality and generosity are the main essence of Lebanese culture and this is most evident during meal times wherein families and friends all get together to celebrate life and catch-up while enjoying healthy and delicious food.

2. Cellar Magneval

Cellar Magneval is a sophisticated wine bar and is among the best spots in Woking where you can grab a sip of refreshing beverage. They also offer a selection of delightful food. Some of their sharing platters are aperitif and crudité, antipasti and cheese, and charcuterie and cheese. They also offer a number of sandwiches during lunchtime.

As an award-winning local bar, event organiser, and delivery service, Cellar Magneval takes pride in their quality food and magnificent wine that you cannot find anywhere else in Woking.

3. Jeitta

Jeita is a Church Path eatery that specialises in exotic Lebanese flavours that is open daily at varying times. Their main courses include shish taouk or chicken cubes, lahem meshwi or charcoal-grilled lamb cubes with rice, and so much more.

They are proud to be among the pioneer Lebanese restaurants that opened their doors in the town of Woking. Jeita follows a simple ethos and that is to make sure that each and every piece of ingredient they us is of the highest quality. A

ll of their offerings, from food, to juices, and even their sauces, are freshly made using authentic family recipes that were passed down from generation to generation.

4. Marciano Lounge

Marciano Lounge belongs to the Lounges chain that has a colourful and lively vibe with friendly staff, a great menu, and lots of cocktails. There are also options for brunch, juicy burgers, tapas, and sandwiches. A trio of long time friends established Lounges in 2002 after spending years in the bar and restaurant trade. They have a simple albeit a bit selfish motivation, and that is to have a place where they can enjoy their drinks.

5. Seasons Café & Kitchen

The Lightbox’s Seasons Café & Kitchen is the best spot to enjoy a pre-gallery peruse meal that combines simple favourites with restaurant-quality dining. During warm summer months, you can also sit outdoors in their courtyard at the side of the canal.

The restaurant provides a cosy place where you can meet up with your friends, enjoy a fun conversation over some cake and coffee, or indulge in a relaxing weekend brunch before you explore the galleries.

No matter how confident you might be with your DIY skills, there are several water problems that are best left to the hands of professional and skilled plumbers. More than fixing the issues, expert plumbers will also make sure that these problems won’t get worse in the first place.

Here are some 7 warning signs that there is a problem with your plumbing system and that you need to call a plumber who can nip the issue in the bud.

1. Bad Odours

If you notice bad smells in your home, this indicates that the valve doesn’t perform well and needs repair or replacement. This is never an easy fix so it is important to get in touch with a plumber immediately. The plumber will make sure that your house will be free from the smell of rotten eggs or sewage water.

2. Clogged Drains

You might be dealing with a clogged drain if you noticed standing water in your kitchen sink or bathtub (maybe you need a new bathroom fitted!).  When this happens, make sure that you clear it out right away. A professional plumber will be able to get rid of the obstructions and even check if there could be other underlying problems in your drainage system.

3. Mould Growth

Mould growth is usually the result of leaky pipes in the ceilings or walls. Contact a plumber to inspect your water system if you see some mould formation around your house. Mould may lead to serious property damage and may pose health hazards if not addressed without delay.

4. Trouble Maintaining Consistent Water Pressure or Low Water Pressure

Although you can solve simple water pressure problems by clearing up residue or screwing off the aerators, it means trouble if the pressure doesn’t improve even after you do it. Low water pressure may indicate a degraded water line, a fractured pipe, or water leak in the unit. Fixing this on your own may make matters worse.

5. No Draining or Slow Draining

If your toilet, tub, or sink takes too long to drain, you will surely need the help of an expert to properly address that clog. It is also best to call in a plumber if there is no draining at all even after you use plunging and drain cleaners.

6. Gas Smell

Never take it lightly if there is a smell of gas anywhere in your home. The natural gas may combine with other scents but its odour is still unmistakable and can be noticed right away. Make sure to switch off your appliances to prevent damages because of gas leaks from pipes. Even a small spark in a bulb may ignite a hazardous gas explosion.

7. Gurgling Water

If your toilet starts to gurgle while you are taking a shower, you will know instantly that there is something wrong. However, you might not be able to determine its cause. If you have a clogged drain and water is trapped in your faucet, you will need professional help at the soonest time possible.

Leaky taps, damaged pipes, and faulty appliances can cause serious trouble for your home. A major leak can easily lead to thousands of dollars worth of repair that can cause massive disruption in your home’s activities. Good thing that that automatic water shut off valves are here to the rescue. Always speak to a reliable plumber to gain more knowledge on what valve is right for your home.

1. Dome

With the help of the Z-Wave Hub app, you can control this water shut-off valve from anywhere. This is compatible with all water tanks and water heaters provided that you are using a quarter-turn ball valve. This is easy to install and use even if you don’t have any plumbing skills.

2. EcoNet Controls

A true powerhouse in the smart home water management, EcoNet Controls is a Z-wave certified valve compatible with popular smart hubs and could work with different water sensors. This can produce powerful enough torques for turning even the toughest valves.

3. Flow by Moen

Flow by Moen features a smart water monitor for leak detection and flow tracking. Once it detects a  leak, the smart valve automatically shuts off water to the home to limit water damage.

4. FortrezZ Wireless Z-Wave

FortrezZ Wireless Z-Wave is a water valve that is totally integrated with Samsung SmartThings. This valve will help ensure that your house remains leak-free. Although it has a rather straightforward setup, you might need the help of a professional plumber.

5. Grohe Sense Guard

The WiFi-connected water controller Grohe Sense Guard is set on your mains water supply pipe. This constantly monitors the water system of your home and detects all anomalies from the smallest leaks to major bursts. Once it detects any variation from the usual, this immediately turns your water system off.

6. Guardian Leak Prevention System

Guardian can automatically shut off your entire water system once it detects a frozen pipe, leak, or earthquake to avoid further damage. You can install the Guardian Wireless Leak Detectors up to 1,000 feet away from its Valve Controller, allowing the device to cover even the biggest homes.

7. HomeSeer Z-Wave Plus Water Valve Controller

This water valve controller allows you to automatically and remotely control the water flow and comes with a wireless Z-wave compatibility. This valve can be used with various sensors. It shuts off immediately once a water leak is detected and stops the flow of water.

8. LeakSmart

LeakSmart is a type of automatic water shut off valve that cannot only detect leak but can also instantly shut off your main water supply and notify your device via the LeakSmart app.

9. Phyn Plus

Phyn Plus is a one of a kind device that protects the entire water system of your home from just one location. This connects to the existing WiFi network in your house so you don’t need to buy another smart home hub.

10. Vaticas Smart Water Valve

A smart water valve compatible with Google Assistant, Alexa, and Tuya Smart, Vaticas features a timer that lets users schedule water tanks and heaters through the app. This is also compatible with detection or water immersion sensor.

Info provided by Flowright Plumbers Woking:

How often do you even think about your boiler?

Many of you are probably guilty of taking your boiler for granted. You just expect that it will always be there to give you heat and provide you hot water supply.

It is not until your boiler gets broken that you realize how your UK home can turn into complete chaos without it. When this happens, you will surely wish that you knew about the common faults in boilers and how you can fix them. Consider calling an engineer out to repair or replace your boiler.

Below are 5 of the common boiler problems you need to watch out for:

1. No Hot Water or Heating

This can be due to many potential culprits like a broken valve, thermostat, or diaphragm. The first step you can take is to check the thermostat. If there is no problem with the thermostat but there is a broken valve, diaphragm, or airlock, all you have to do is replace it for your boiler to work again.

2. Lower Boiler Pressure

A leak somewhere in the central heating unit and a damaged pressure relief are common reasons for lower boiler pressure.

This can reduce the efficiency of your boiler and its ability of heating up your house altogether. One common sign of this problem is if the pressure gauge fluctuates below and above the 1 bar mark. This is the first thing you need to check.

3. Boiler Gets Cut Out

There are times when your boiler may fire up only to switch off or trip in between. It can also happen as a result of low pressure. Make sure that you inspect the pressure gauge if you are experiencing this issue. You just need to re-pressure your unit if the needle is below 1. If there is nothing wrong with the boiler pressure, it is possible that air got trapped. You can bleed the radiators to fix this.

4. Strange Boiler Noise

Boilers normally produce sounds while it is in operation, particularly if it is firing up. But, if your unit starts to make weird whistling, banging, or gurgling noises all of a sudden, it is recommended to hire a qualified engineer.

Strange boiler noises might be due to a faulty pump, air in the unit, low water pressure, or an accumulation of a limescale called kittling.

5. Water Leakage

It is never a good sign if there is a leak that comes from your boiler. The reason for this leak depends on where the water comes from. It is a must that you avoid trying to repair this leak in your boiler on your own. This is a job that is best left to the hands of a Gas Safe registered engineer.

The most common reason for boiler leaks is a broken or damaged internal component like a pressure valve or pump seal. If there is leak that comes from the pressure valve, there is a possibility of a very high boiler pressure. On the other hand, a leak from the pump seal indicates that it might have already worn out and requires replacement.

If your boiler leaks around the tank or pipes, this is a telltale sign of corrosion. If not, this might be due to poor installation. Make sure to call out a heating engineer to diagnose and solve the leak.